Troubleshooting Geo-Services

How Can We Help?

You are here:
< All Topics

By enabling Geo-Services on mobile devices, the device is allowed to check in and relay its location relative to the radio tower or router the device connected to. For this feature, enable Geo-Services on your mobile devices and ensure that you have a data connection (e.g., 3G, 4G LTE, Wi-Fi).

Geo-Services tips

  • The lower the data connection and/or coverage in the area, the less accurate Geo-Services will be. The more data connection and/or coverage in the areas, the more accurate Geo-Services will be.
  • Staying close to Geo-Fences, or only barely crossing it can mean that the Geo-Device will never triangulate outside of the Geo-Fence. This can cause notifications or actions to incorrectly trigger or not trigger occur at all.
  • Increasing the Geo-Fence radius provides more accurate notifications based on location.
  • Wi-Fi can be used as data connection for triangulation. The device does not need to be connected for triangulation to occur.
  • The more accurate Geo-Fence radius sizes are around or larger than 2 to 2.5 miles radius. The minimum radius can be one mile but is not recommended. Note: If the customer account is in Canada, the minimum distance is 3 kilometers for a Geo-Fence.

To manage Geo-Services using the website:

  1. Log into the website.
  2. Click Settings.
  3. Click Geo-Services.

Note: Only the login permissions of Master Control, Full Control, and Custom with Notification settings enabled can manage Geo-Services on a customer account.

Troubleshooting Geo-Services:

Verify Geo-Services is setup properly

Verify you have the proper Geo-Services notifications and rules setup on your account.

Verify location services is turned on

Verify location services is turned on for the device, and also for the app.

Important: iPhones and Android phones also require location services to be turned on specifically for the app through phone settings.

To enable location services on an Android phone: 

Note: These steps may vary depending on the model of the Android phone.

  1. Tap to open the Settings application.
  2. Tap Connections.
  3. Tap the Location toggle switch to enable location services.
To enable location services on an iPhone:

Note: In order for this option to appear, Geo-Services need to be enabled on the app.

  1. Tap to open the iPhone’s Settings application.
  2. Flick to scroll to the apps, and tap to select Alarm.com.
  3. Tap Location.
  4. In Allow Location Access, tap Always.
Verify the correct device is enabled for Geo-Services

The user can verify the correct device is enabled by turning Geo-Services off in the app, then log into the website to verify a correlating device was paused. A device that is paused will be grayed out.

In the following image, the Geo-Device named iPhone is enabled and the Geo-Device named Samsung is disabled.

Important: Remember to re-enable the Geo-Device in the app after this test.

Increase the Geo-Fence size

Increase the Geo-Fence size to a minimum of 2 to 2.5 mile radius. If it is already set to a 2.5 mile radius, increase the Geo-Fence radius to 5 miles.

Enable Wi-Fi on the Geo-Device

Enable Wi-Fi on the phone that is a Geo-Device on the account. This may help with triangulation if there are not many towers in that area. Turning on Bluetooth can also help.

Note: The Geo-Device is not required to be connected to a Wi-Fi or Bluetooth network to function.

Verify settings that can affect Geo-Services on Android devices

For Android phones, there are several settings that can affect consistent Geo-Services functionality. The app also displays possible settings that are affecting functionality as shown in the following image:
Geo-Service Android troubleshooting.png

Verify the Android device settings have the best corresponding values:

Note: The names of settings may vary on Android devices.

  • Location or Location services should be toggled on.
  • Locating method or Location mode should be set to high accuracy.
  • Wi-Fi scanning and Bluetooth scanning, which may be in the Improve accuracy setting, should both be toggled on.
  • Power saving mode and Ultra power saving mode should both be toggled off.
  • Battery optimization or Optimize battery usage, which may be in the menu option of the Battery settingshould be toggled off for the app, Google Play Services, Wi-Fi, and Bluetooth.
    • When selecting the option to Turn Battery Optimization for this App Off from the app, the phone displays the devices that do not have optimization on. Tap the arrow under Battery optimization to select All Apps, then tap Alarm.com to verify that Don’t Optimize is selected.The following image is an example of turning off battery optimization on an Android device:

      Battery Optimization on Android.png

If the issue is still unresolved:

Important: Perform the following steps in this order:

  1. Disable Geo-Services in the app.
  2. Delete the Geo-Device on the website.
  3. Force close the app.
  4. Re-enable Geo-Services in the app.
  5. Add the device back to the Geo-Fence rules or notifications.
  6. Sync the Geo-Device by crossing in and out of the Geo-Fence.
  7. Test by crossing the fence again.Note: Geo-Services uses triangulation to conserve battery power. The device should pass a significant distance over the geo-fence in either direction to register crossing the geo-fence.
Was this article helpful?
0 out Of 5 Stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
5
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Table of Contents

Still having trouble?

Contact Customer Care