How Can We Help?
What do the LEDs on the ADC-VDB770 Mean?
Status light guide
Note: The ADC-VDB770 does not give an indication when it detects motion or a button press.
|No local or Internet connection
|Power on, camera booting
|Connected to Alarm.com
|Local network connection
|Unable to ring indoor chime
For more information about what causes this status, see What does the double-blinking blue LED on the ADC-VDB770 mean?
|WPS mode (press and hold button for 30-45s)
|Wi-Fi Access point mode (press and hold button for 45-60s)
|Camera power cycling (press and hold button for 60-75s)
Alternating red & green
|Camera resetting to factory default (press and hold button for >75s)
Note: If the indoor chime is enabled for the device, holding down the button will trigger a single indoor chime immediately after being pressed. If desired, the indoor chime can be disabled through the Customer Website before pressing the button to initiate one of the above modes.